Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2020HR-V LX, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXCVT SYSTEM DTCS
2020 Honda HR-V LX, FWD
CVT System DTCS
2020 Honda HR-V LX, FWDSECTION CVT System DTCS
CVT SYSTEM DIAGNOSTIC TROUBLE CODE IDENTIFICATON
| DTC *(1) | Two Drive Cycle Detection | A/T Gear Position Indicator | MIL | Detection Item |
|---|---|---|---|---|
| P0501 (36) *(2) | --- | Blinks | ON | CVT Speed Sensor Circuit Range/Performance |
| P0502 (36) *(2) | --- | Blinks | ON | CVT Speed Sensor Circuit Open/Short |
| P0705 (5) *(2) | --- | Blinks | ON | Transmission Range Switch Multiple Shift Position Input |
| P0706 (6) *(2) | o | OFF | ON | Transmission Range Switch Open |
| P0711 (28) *(2) | o | Blinks | OFF | CVT Fluid Temperature Sensor (Rang/Performance) |
| P0712 (28) *(2) | o | Blinks | OFF | CVT Fluid Temperature Sensor (Short) |
| P0713 (28) *(2) | o | Blinks | OFF | CVT Fluid Temperature Sensor (Open) |
| P0714 (28) *(2) | o | Blinks | OFF | CVT Fluid Temperature Sensor (Intermittent Failure) |
| P0716 (52) *(2) | --- | Blinks | ON | Input/Turbine Speed Sensor "A" Circuit Range/Performance |
| P0717 (52) *(2) | --- | Blinks | ON | Input/Turbine Speed Sensor "A" Circuit No Signal |
| P0741 (40) | o | Blinks | ON | Torque Converter Clutch Circuit Performance or Stuck OFF |
| P0746 (104) | o | Blinks | ON | CVT Drive Pulley Pressure Control Solenoid Valve Stuck OFF |
| P0777 (105) | o | Blinks | ON | CVT Driven Pulley Pressure Control Solenoid Valve Stuck ON |
| P0780 (100) *(3) | o | Blinks | ON | Shift Error |
| P0792 (34) *(2) | --- | Blinks | ON | Intermediate Shaft Speed Sensor "A" Circuit Range/Performance |
| P0793 (34) *(2) | --- | Blinks | ON | Intermediate Shaft Speed Sensor "A" Circuit No Signal |
| P0796 (106) | o | Blinks | ON | Pressure Control Solenoid Valve "C" Performance or Stuck OFF |
| P0797 (106) | o | Blinks | ON | Pressure Control Solenoid Valve "C" Stuck ON |
| P0842 (56) *(2) | o | Blinks | OFF | Transmission Fluid Pressure Sensor/Switch "A" Circuit Low |
| P0843 (56) *(2) | o | Blinks | OFF | Transmission Fluid Pressure Sensor/Switch "A" Circuit High |
| P0962 (38) *(2) | --- | Blinks | ON | CVT Drive Pulley Pressure Control Valve Circuit Low |
| P0963 (38) *(2) | --- | Blinks | ON | CVT Drive Pulley Pressure Control Valve Circuit High |
| P0966 (39) *(2) | --- | Blinks | ON | CVT Driven Pulley Pressure Control Valve Circuit Low |
| P0967 (39) *(2) | --- | Blinks | ON | CVT Driven Pulley Pressure Control Valve Circuit High |
| P0970 (50) *(2) | --- | Blinks | ON | Pressure Control Solenoid "C" Control Circuit Low |
| P0971 (50) *(2) | --- | Blinks | ON | Pressure Control Solenoid "C" Control Circuit High |
| P0976 (8) *(2) | o | Blinks | ON | Shift Solenoid Valve "B" Circuit Low |
| P0977 (8) *(2) | o | Blinks | ON | Shift Solenoid Valve "B" Circuit High |
| P1717 (62) *(2) | o | Blinks | OFF | Transmission Range Switch ATP RVS Switch (Open or Short) |
| P1840 (36) *(2) | o | Blinks | OFF | CVT Speed Sensor Circuit Forward Rotation Range/Performance |
| P1841 (36) *(2) | o | Blinks | OFF | CVT Speed Sensor Circuit Reverse Rotation Range/Performance |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.