SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2020HR-V LX, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE CONTROL SYSTEM / ENGINE MECHANICAL - SERVICE, TESTING AND TROUBLESHOOTINGINSPECTIONVALVE INSPECTIONINSPECTION
2020 Honda HR-V LX, FWD

Valve Inspection: Inspection

2020 Honda HR-V LX, FWDSECTION Inspection
  1. Valve - Remove
  2. Valve - Inspect
    GHH435262Courtesy of HONDA, U.S.A., INC.
    		 1. Measure the valve in these areas.

    Intake Valve Dimensions 

    Exhaust Valve Dimensions 
    A Standard (New):  115.65-116.25 mm (4.5531-4.5768 in) 
    B Standard (New):  25.85-26.15 mm (1.0177-1.0295 in) 
    C Standard (New):  5.45-5.46 mm (0.2146-0.2150 in) 
    C Service Limit:  5.42 mm (0.2134 in) 
    A Standard (New):  117.50-118.10 mm (4.6260-4.6496 in) 
    B Standard (New):  32.85-33.15 mm (1.2933-1.3051 in) 
    C Standard (New):  5.48-5.49 mm (0.2157-0.2161 in) 
    C Service Limit:  5.45 mm (0.2146 in) 
  3. All Removed Parts - Install
    1. Install the parts in the reverse order of removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.