Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
VSA Modulator-Control Unit Connector for Inputs and Outputs
2020 Honda CR-V Hybrid EXSECTION VSA Modulator-Control Unit Connector for Inputs and Outputs
VSA Modulator-Control Unit Inputs and Outputs for 46P Connector (female terminals)
| Terminal number | Terminal sign | Description |
|---|---|---|
| 1 | +B_ABS/VSA_FSR | Power source for the fail-safe relay |
| 2 | GND | Ground for the VSA modulator-control unit |
| 3 | +B_ABS/VSA_MTR | Power source for the motor relay |
| 4 | GND | Ground for the pump motor |
| 5 | EPB_R_ACT+ | Drive the right-rear electric parking brake actuator motor |
| 6 | EPB_R_ACT- | Drive the right-rear electric parking brake actuator motor |
| 7 | EPB_L_ACT- | Drive the left-rear electric parking brake actuator motor |
| 8 | EPB_L_ACT+ | Drive the left-rear electric parking brake actuator motor |
| 9 | SW1 | Detects electric parking brake switch signal |
| 10 | SW4 | Detects electric parking brake switch signal |
| 11 | Not used | --- |
| 12 | Not used | |
| 13 | PARK_BUSY | Sends parking brake signal |
| 14 | IG1_VSA/ABS | Power source for activating the system |
| 15 | RR_R_ABS_SNSR- | Detects right-rear wheel speed sensor signal |
| 16 | Not used | --- |
| 17 | RR_L_ABS_SNSR+ | Detects left-rear wheel speed sensor signal |
| 18 | Not used | --- |
| 19 | Not used | |
| 20 | Not used | |
| 21 | Not used | |
| 22 | Not used | |
| 23 | Not used | |
| 24 | SW3 | Detects electric parking brake switch signal |
| 25 | SW6 | Detects electric parking brake switch signal |
| 26 | Not used | --- |
| 27 | Not used | |
| 28 | F-CAN B_L | F-CAN communication circuit |
| 29 | PARK_LAMP | Sends electric parking brake indicator signal |
| 30 | FR_R_ABS_SNSR+ | Detects right-front wheel speed sensor signal |
| Terminal number | Terminal sign | Description |
|---|---|---|
| 31 | RR_R_ABS_SNSR+ | Detects right-rear wheel speed sensor signal |
| 32 | RR_L_ABS_SNSR- | Detects left-rear wheel speed sensor signal |
| 33 | FR_L_ABS_SNSR+ | Detects left-front wheel speed sensor signal |
| 34 | F-CAN C_L | F-CAN communication circuit |
| 35 | FR_R_ABS_SNSR- | Detects right-front wheel speed sensor signal |
| 36 | Not used | --- |
| 37 | Not used | |
| 38 | Not used | |
| 39 | Not used | |
| 40 | F-CAN B_H | F-CAN communication circuit |
| 41 | Not used | --- |
| 42 | FR_L_ABS_SNSR- | Detects left-front wheel speed sensor signal |
| 43 | Not used | --- |
| 44 | Not used | |
| 45 | Not used | |
| 46 | F-CAN C_H | F-CAN communication circuit |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.