Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rearview Camera Connector for Inputs and Outputs
2020 Honda CR-V Hybrid EXSECTION Rearview Camera Connector for Inputs and Outputs
Rearview Camera 8P Connector (male terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| 1 | CAMERA_V_GND | Ground for NTSC video signal |
| 2 | CAMERA_VCC | Power source for rearview camera |
| 3 | CAMERA_BIT0 | Inputs mode select signal for rearview camera |
| 4 | CAMERA_BIT1 | Inputs mode select signal for rearview camera |
| 5 | SH_CAMERA | Shield for terminals No. 1, No. 2, No. 7, and No. 8 |
| 6 | CAMERA_ADPT | Detects connection for rearview camera |
| 7 | CAMERA_V | Outputs NTSC video signal |
| 8 | CAMERA_GND | Rearview camera ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.