Blind Spot Information (BSI) System DTC Troubleshooting Index

2018 Honda Ridgeline Black EditionSECTION Blind Spot Information (BSI) System DTC Troubleshooting Index

Left Side BSI Radar Unit DTC 

DTC  Detection Item 
B18A1  Left Side BSI Radar Unit Internal Circuit Error
B18A5  Left Side BSI Radar Unit Temperature High
B18B4  Left Side BSI Radar Unit Dirty
B18B8  Left Side BSI Radar Unit Azimuth Off Alignment
B18BA  Different Version in the Left and Right Side BSI Radar Unit
B18C5  Short to GND in the Left Side BSI Radar Unit Indicator Circuit
B18C6  Short to Power in the Left Side BSI Radar Unit Indicator Circuit
B18C7  Open in the Left Side BSI Radar Unit Indicator Circuit
B18DB  Left Side BSI Radar Unit Received The Audio/Navigation Unit Failure Information
B18EA  Left Side BSI Radar Unit Received PCM (A/T System) Failure Information
U1280  Communication Bus Line Error (Bus-Off)
U1281  Left Side BSI Radar Unit Lost Communication With MICU
U128D  Left Side BSI Radar Unit Lost Communication With Gauge Control Module
U1297  Left Side BSI Radar Unit Lost Communication With Right Side BSI Radar Unit

Right Side BSI Radar Unit DTC 

DTC  Detection Item 
B1E51  Right Side BSI Radar Unit Internal Circuit Error
B1E55  Right Side BSI Radar Unit Temperature High
B1E64  Right Side BSI Radar Unit Dirty
B1E68  Right Side BSI Radar Unit Azimuth Off Alignment
B1E6A  Different Version in the Left and Right Side BSI Radar Unit
B1E75  Short to GND in the Right Side BSI Radar Unit Indicator Circuit
B1E76  Short to Power in the Right Side BSI Radar Unit Indicator Circuit
B1E77  Open in the Right Side BSI Radar Unit Indicator Circuit
B1E9A  Right Side BSI Radar Unit Received PCM (A/T System) Failure Information
U1280  Communication Bus Line Error (Bus-Off)
U1281  Right Side BSI Radar Unit Lost Communication With MICU
U128D  Right Side BSI Radar Unit Lost Communication With Gauge Control Module
U128F  Right Side BSI Radar Unit Lost Communication With Left Side BSI Radar Unit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.