Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2018RIDGELINE BLACK EDITIONREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXGAUGE CONTROL MODULE DTCS2017 2018 2019
2018 Honda Ridgeline Black Edition
2017 2018 2019
2018 Honda Ridgeline Black EditionSECTION 2017 2018 2019
| DTC | Description |
|---|---|
| B1175 | Fuel level sensor (fuel gauge sending unit) circuit malfunction |
| B1176 | Fuel level sensor (fuel gauge sending unit) circuit short |
| B1192 | Gauge control module lost communication with battery sensor ECU (LIN BUS connected) |
| U0029 | F-CAN communication line error |
| U0100 | Gauge control module lost communication with ENG/AT |
| U0104 | Gauge control module lost communication with Driving Support System Control Unit |
| U0114 | Gauge control module lost communication with All Wheel Drive Control Module |
| U0122 | Gauge control module lost communication with VSA modulator-control unit |
| U0127 | Gauge control module lost communication with TPMS control unit |
| U0131 | Gauge control module lost communication with EPS unit |
| DTC | Description |
|---|---|
| U0151 | Gauge control module lost communication with SRS unit |
| U1100 | Gauge control module lost communication with Driving Support System Control Unit |
| U1280 | Communication bus line error (BUS-OFF) |
| U1281 | Gauge control module lost communication with MICU (MICU frame) |
| U1288 | Gauge control module lost communication with PARKSR |
| U128F | Gauge control module lost communication with BSI unit |
| U3000-49 | ECU internal circuit malfunction |
| U3000-51 | Reprogramming error |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.