Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2018RIDGELINE BLACK EDITIONREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROL SYSTEM - ADVANCED DIAGNOSTICS (P0069 - P050D)ADVANCED DIAGNOSTICSDTC P011ACONFIRMATION PROCEDURE
2018 Honda Ridgeline Black Edition
Confirmation Procedure
2018 Honda Ridgeline Black EditionSECTION Confirmation Procedure
Operating Condition
- Turn the vehicle to the OFF (LOCK) mode, and wait at least 6 hours.
- Start the engine, and let it idle for at least 10 seconds.
- Do not use an engine block heater because the engine coolant temperature will not stay equal during engine stop.
- When freeze data is stored, test the vehicle under an ambient temperature close to the intake air temperature in the freeze data.
- When an ambient temperature extremely changes, malfunction judgment may not execute. Avoid extreme temperature changing condition after or before engine start. (When the vehicle is parked in the garage, open the shutter to introduce outside air; then start the engine.)
With the HDS
None.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.