Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2013CIVIC EX, 2D COUPE, STANDARD TRANSREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
2013 Honda Civic EX, 2D Coupe, Standard Trans
Quick Lookups: Fluids
2013 Honda Civic EX, 2D Coupe, Standard TransSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | 2.70 OZS. | 0.07 L | PAG 46 | Approximate capacity. | S | |
| Air Cond Refrigerant | 0.94 LBS. | 0.42 KG | HFC-134a (R-134a) | S | |||
| Brake Fluid | N/A | N/A | HONDA Heavy Duty Brake Fluid DOT 3 | S | |||
| Engine Coolant | 1.8L Eng | 5.91 QTS. | 5.59 L | HONDA Long-Life Antifreeze/Coolant Type 2 | 50/50 with distilled water. Change including the remaining 0.46 qt. in the reserve tank. | S | |
| Engine Oil | 1.8L Eng | Drain and Refill,w/Filter | 3.90 QTS. | 3.69 L | API - Premium-grade SAE 0W-20 detergent oil. Genuine HONDA Motor Oil 0W-20 | You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade. | S |
| Engine Oil | 1.8L Eng | Drain and Refill,w/o Filter | 3.70 QTS. | 3.5 L | API - Premium-grade SAE 0W-20 detergent oil. Genuine HONDA Motor Oil 0W-20 | You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade. | S |
| Fuel Tank | 13.20 GALS. | 49.96 L | S | ||||
| Manual Transmission Fluid | 1.8L Eng | Drain and Refill | 1.50 QTS. | 1.41 L | HONDA Manual Transmission Fluid | S | |
| Windshield Washer Fluid | 2.60 QTS. | 2.46 L | All Weather Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.