Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2013 Honda CR-V LX, 2.4L Eng VIN 4
Quick Lookups: Fluids
2013 Honda CR-V LX, 2.4L Eng VIN 4SECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2.70 OZS. | 0.07 L | PAG 46 | S | |||
| Air Cond Refrigerant | 0.94 LBS. | 0.42 KG | HFC-134a (R-134a) | S | |||
| Automatic Transmission Fluid | AWD | Drain and Refill | 2.70 QTS. | 2.55 L | HONDA Automatic Transmission Fluid ATF DW-1 | Honda has introduced ATF DW-1, a new synthetic ATF that replaces ATF-Z1. DW-1 has been designed to improve cold transmission performance and fuel economy. ATF DW-1 is factory fill for all 2011 and later Honda vehicles equipped with Automatic Transmissions. ATF DW-1 will replace all earlier ATF Fluids. ATF-Z1 may be used in 2010 and older models while it is available. See TSB No. A10110H. | S |
| Brake Fluid | N/A | N/A | HONDA Heavy Duty Brake Fluid DOT 3 | Fill to line on reservoir. | S | ||
| Differential Gear Oil | Drain and Refill,Rear | 1.32 QTS. | 1.24 L | HONDA Dual Pump Fluid II | Use HONDA Dual Pump II Fluid only. DO NOT mix with any other fluid. | S | |
| Differential Gear Oil | Total Capacity,Rear | 1.57 QTS. | 1.48 L | HONDA Dual Pump Fluid II | Use HONDA Dual Pump II Fluid only. DO NOT mix with any other fluid. | S | |
| Engine Coolant | 1.64 GALS. | 6.2 L | HONDA Long-Life Antifreeze/Coolant Type 2 | Change including the remaining 0.16 US gal. (0.62 l) in the reserve tank. This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water. | S | ||
| Engine Oil | Drain and Refill,w/Filter | 4.20 QTS. | 3.97 L | API - SAE 0W-20 Detergent Oil | You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Engine Oil | Drain and Refill,w/o Filter | 4.00 QTS. | 3.78 L | API - SAE 0W-20 Detergent Oil | You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Fuel Tank | 15.30 GALS. | 57.91 L | S | ||||
| Windshield Washer Fluid | 2.60 QTS. | 2.46 L | All Weather Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.