Navigation System

2013 Honda CR-V EX, 2.4L Eng VIN 4SECTION Navigation System
DTC Description Failure Circuit
1002 SD Read Error SD module
1101 Media Bus Send Error Internal Bus
1102 USB Diag USB
1301 GPS Antenna Error GPS antenna
1302 GPS Receiver Error 1 GPS receiver
1303 GPS Receiver Error 2 GPS receiver
1304 Gyro Error 1 Internal gyro
1305 Gyro Error 2: ECU Temp XX °C Internal gyro
1306 Vehicle Speed Pulse Vehicle speed pulse
1701 Rear Camera Error Rearview camera
1702 XM Antenna Error XM
2607 XM Diag XM
2608 Rear Camera Diag Rearview camera
2610 DRAM Diag Navigation ECU DRAM
2701 GPS Diag: Antenna GPS
2702 GPS Diag: Receiver in Navi ECU GPS
2703 Aircon Diag Climate control unit
2705 HFL Diag HFL
2706 Gyro Diag: ECU Temp XX °C Internal gyro
2707 Mic Diag Microphone
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.