Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Vehicle Moves In D, D3, 1, And R, But Not In 2
2010 Honda Crosstour 2WD V6-3.5LSECTION Vehicle Moves In D, D3, 1, And R, But Not In 2
Vehicle moves in D, D3, 1, and R, but not in 2
Accumulator body defective
2nd clutch defective
Notes
Check the 2nd clutch pressure A/T Pressure Test.
Notes
Inspect the clearance between the clutch end-plate and the top disc of the 2nd clutch. If the clearance is out of tolerance, replace the 2nd clutch.
Notes
Replace the accumulator body.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.