Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2010CROSSTOUR 2WD V6-3.5LREPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONP CODE CHARTSP0351ADVANCED DIAGNOSTICS
2010 Honda Crosstour 2WD V6-3.5L
Advanced Diagnostics
2010 Honda Crosstour 2WD V6-3.5LSECTION Advanced Diagnostics
Advanced Diagnostics - DTC P0351: No. 1 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0352: No. 2 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0353: No. 3 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0354: No. 4 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0355: No. 5 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0356: No. 6 Cylinder Ignition Coil Circuit Malfunction
General Description
The ignition coil is triggered at the optimum time by the powertrain control module (PCM). The PCM detects a malfunction when the engine is running and the return signal does not change for a specified time, the PCM detects a malfunction and stores a DTC.
Monitor Execution, Sequence, Duration, DTC Type, OBD Status
Enable Conditions
Malfunction Threshold
The return signal does not change for at least 5 seconds when the ignition coil is triggered.
Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in the PCM memory.
Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.
Advanced Diagnostics - DTC P0352: No. 2 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0353: No. 3 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0354: No. 4 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0355: No. 5 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0356: No. 6 Cylinder Ignition Coil Circuit Malfunction
General Description
The ignition coil is triggered at the optimum time by the powertrain control module (PCM). The PCM detects a malfunction when the engine is running and the return signal does not change for a specified time, the PCM detects a malfunction and stores a DTC.
Monitor Execution, Sequence, Duration, DTC Type, OBD Status
Enable Conditions
Malfunction Threshold
The return signal does not change for at least 5 seconds when the ignition coil is triggered.
Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in the PCM memory.
Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.