Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2009PILOT TOURING, 3.5 4REPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSCLIMATE CONTROLCLIMATE CONTROL UNIT REMOVAL/INSTALLATION
2009 Honda Pilot Touring, 3.5 4
Climate Control Unit Removal/Installation
2009 Honda Pilot Touring, 3.5 4SECTION Climate Control Unit Removal/Installation
- Remove the audio unit, (see AUDIO UNIT REMOVAL/INSTALLATION )
- Remove the self-tapping screws, bolts, and the brackets (A).
- Remove the self-tapping screws and separate the audio unit and the climate control unit (B).
- Install the control unit in the reverse order of removal. After installation, operate the various functions to see whether works properly.
- Run the self-diagnostic function to confirm that there are no problems in the system, (see GENERAL TROUBLESHOOTING INFORMATION )
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.