Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHONDA2009PILOT TOURING, 3.5 4REPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOWSPOWER WINDOW MASTER SWITCH REPLACEMENT

2009 Honda Pilot Touring, 3.5 4

Power Window Master Switch Replacement

2009 Honda Pilot Touring, 3.5 4SECTION Power Window Master Switch Replacement

Carefully remove the power window switch panel (A).

Fig 1: Identifying Power Window Switch Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the 37P connector (B) from the power window master switch, and the 13P connector (C) from the power mirror switch.
Remove the four screws and the power window master switch (A).

Fig 2: Identifying Power Window Master Switch & Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the switch in the reverse order of removal.
RESETTING THE POWER WINDOW CONTROL UNIT .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.