Grab Handle Removal/Installation

Special Tools Required 

KTC trim tool set SOJATP2014*

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

1. Lower the grab handle, then pry out the caps (A). Remove the self-tapping ET screws, then remove the grab handle (B). Remove the remaining grab handles.
   Fig 1: Grab Handle And Screws With Torque Specification

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install the grab handle in the reverse order of removal, and note these items:
   • If the side curtain airbag has deployed, replace the grab handles with new ones.
   • To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect removed grab handle and replace it if it has any deformations in the grab handle (A).