SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2009CR-V EX, 2.4 RE3REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 75 (NAVIGATION SYSTEM)SYSTEM DIAGNOSTIC MODESAVE USERS MEMORY
2009 Honda CR-V EX, 2.4 RE3

Save Users Memory

2009 Honda CR-V EX, 2.4 RE3SECTION Save Users Memory
WARNING: This page is about a different car, the 2011 Honda CR-V and 2010 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

When replacing the audio-navigation unit, this function allows the dealer to transfer the customer's personal data to the new audio-navigation unit. The transferred information includes their Setup settings and personal addresses. Inserts a PC card to the audio-navigation unit, and then select the Save Users Memory function. The two functions in this diagnostic screen are EXPORT and IMPORT. EXPORT saves the customer's data to the PC card, and IMPORT moves the PC card files to the new audio-navigation unit.

You need to insert a PC card for these functions to work.

Fig 1: Display - Save Users Memory
G06612863Courtesy of AMERICAN HONDA MOTOR CO., INC.

Before starting this function, see the PC CARD FAQS  for information regarding PC cards, and the use of this function.

  1. Select the EXPORT button to move the customer's data from the original audio-navigation unit to the PC card. When prompted, select YES on the Export User Data Confirmation screen. The process takes only a couple of seconds. The system stores two files on the card.
    NOTE: If the EXPORT button is grayed out, check the PC card's edge connector, and the pins inside the audio-navigation unit (with a flashlight) for damage.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.