AM/FM Antenna Replacement

2009 Honda CR-V EX, 2.4 RE3SECTION AM/FM Antenna Replacement
NOTE: A loose AM/FM antenna nut will affect radio sound quality.
  1. Remove the headliner (see HEADLINER REMOVAL/INSTALLATION ).
  2. Disconnect the lead connector (A) from the AM/FM antenna (B).
    Fig 1: Lead Connector And AM/FM Antenna With Torque Specifications
    G06612693Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the nut (C) from the AM/FM antenna.
  4. Install the AM/FM antenna in the reverse order of removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.