SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2009CR-V EX, 2.4 RE3REPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMINTAKE AIR SYSTEMINTAKE AIR RESONATOR REMOVAL/INSTALLATION
2009 Honda CR-V EX, 2.4 RE3

Intake Air Resonator Removal/Installation

2009 Honda CR-V EX, 2.4 RE3SECTION Intake Air Resonator Removal/Installation
  1. Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
  2. Remove the battery.
  3. Remove the battery base (A). A
    Fig 1: Identifying Battery Base
    G06610118Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the air intake duct. (A).
    Fig 2: Identifying Air Intake Duct
    G06610119Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
  6. Remove the intake air resonator (A) and duct (B).
    Fig 3: Identifying Intake Air Resonator And Duct
    G06610120Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Install the parts in the reverse order of removal.
  8. Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.