Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Enable Conditions
2008 Honda Ridgeline RTLSECTION Enable Conditions
ENABLE CONDITIONS CHART
| Condition | Minimum | Maximum |
|---|---|---|
| Elapsed time that secondary HO2S activity is not monitored after starting the engine | 20 seconds | - |
| Elapsed time after the fuel cut-off | - | 150 seconds |
| Engine coolant temperature | 156°F (69°C) | - |
| Intake air temperature | 3°F (-16°C) | - |
| Engine speed | 1,150 rpm | 1,950 rpm |
| MAP value | 22 kPa (6.3 in.Hg, 160 mmHg) | 73 kPa (21.6 in.Hg, 550 mmHg) |
| Vehicle speed | 30 mph (48 km/h) | - |
| Fuel trim | 0.73 | 1.47 |
| Fuel feedback | Closed loop | |
| No active DTCs | P0107, P0108, P0111, P0112, P0113, P0117, P0118, P0153, P0154, P0155, P0157, P0158, P0161, P0174, P0175, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0335, P0339, P0340, P0341, P0344, P0401, P0404, P0443, P0496, P0497, P0627, P1077, P1078, P1128, P1129, P1174, P145C, P2197, P2240, P2241, P2247, P2249, P2254, P2255, P2413, P2646, P2647, P2648, P2649, P2A03 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.