Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHONDA2008RIDGELINE RTLREPAIR AND DIAGNOSISBODY & FRAMEMIRRORSPOWER MIRRORSPOWER MIRROR SWITCH TEST/REPLACEMENT

2008 Honda Ridgeline RTL

Power Mirror Switch Test/Replacement

2008 Honda Ridgeline RTLSECTION Power Mirror Switch Test/Replacement

Disconnect the 13P connector from the power mirror switch.

Fig 1: Disconnecting 13P Connector From Power Mirror Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 2: Switch Terminals Position Description Table - Mirror Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Defogger Switch

Fig 3: Switch Terminals Position Description Table - Defogger Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, remove the screws and replace the power mirror switch.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.