Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHONDA2008ODYSSEY EXREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTNAVIGATION SYSTEMNAVIGATION DISPLAY REMOVAL/INSTALLATION

2008 Honda Odyssey EX

Navigation Display Removal/Installation

2008 Honda Odyssey EXSECTION Navigation Display Removal/Installation

Remove the climate control panel CLIMATE CONTROL PANEL REMOVAL/INSTALLATION ).
Remove the three bolts (A) and disconnect the four connectors (B), and then remove the navigation display (C) with the audio disc changer (D).

Fig 1: Identifying Navigation Display With Audio Disc Changer
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Separate the navigation display and the audio disc changer from the bracket.
Install in the reverse order of removal.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.