Wiper Arm/Nozzle Adjustment: Rear

Wiper arm park position 

1. When the wiper arm stops at the park position, confirm that it is at the standard position.
   1. Position at about 1.8 in. (46 mm) from the bottom end of rear window (A)

   Washer nozzle position 

2. When you turn on the washers, confirm 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzles.
   1. b: Position at about 1.3 in. (34 mm) [2.5 in. (64 mm)] from the black ceramic area (B)
   2. c: Position at about 3.9 in. (98 mm) [6.2 in. (158 mm)] from the black ceramic area (B)

      [ ] : '08-10 models

   '07 model 

   Fig 1: Identifying Washer Nozzle Position - 07 Model

   Courtesy of AMERICAN HONDA MOTOR CO., INC.

   '08-10 models 

   Fig 2: Identifying Washer Nozzle Position - 08-10 models

   Courtesy of AMERICAN HONDA MOTOR CO., INC.