SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2008ODYSSEY EXREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINFOTAINMENTNAVIGATION SYSTEMSYSTEM DIAGNOSTIC MODEVERSION
2008 Honda Odyssey EX

System Diagnostic Mode: Version

2008 Honda Odyssey EXSECTION Version

This screen displays the current version of the program, and allows the loading of a new version of the program either from a CD/DVD or from a PC card.

The D-RAM Program version should always be greater than or equal to the Disc Program version. The mapped database version is the date of the database on the DVD.

The Model code is SHJA ('07 model) or SHJX ('08-10 models), and is for factory use only. This code is stored on a chip in the navigation unit. Therefore, every model has a unique part number for the navigation unit.

NOTE: If any model number other than SHJA or SHJX is displayed, replace the navigation unit with the correct part. The model code tells the navigation unit what software to load off the DVD.

Do not use Download, unless instructed to do so by the factory.

'07 model 

Fig 1: Screen - Version ('07 Model)
G05527573Courtesy of AMERICAN HONDA MOTOR CO., INC.

'08-10 model (Touring) 

Fig 2: Screen - Version For '08-10 models (Touring)
G05527574Courtesy of AMERICAN HONDA MOTOR CO., INC.

'08-10 models (except Touring) 

Fig 3: Screen - Version For '08-10 models (Except Touring)
G05527575Courtesy of AMERICAN HONDA MOTOR CO., INC.

There are two Navigation DVDs produced for this model.

  • The DVD labeled United States is for the US market and contains maps for the contiguous 48 US states, Hawaii, and some southern portions of Canada. Customers wanting additional northern coverage in Canada, can purchase a Canada DVD by contacting the DVD fulfillment desk.
  • The DVD labeled Canada, is for the Canada market, and contains maps for all of Canada, plus some of the northern US states. If customers with this DVD require full US coverage (including states like Florida and Texas), they may purchase a United States DVD by contacting the DVD fulfillment desk.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.