Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2008ELEMENT EX, 2.4 YH2, AUTOMATICREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMADVANCED DIAGNOSTICSDTC P0980: OPEN IN SHIFT SOLENOID VALVE C CIRCUITDRIVING PATTERN
2008 Honda Element EX, 2.4 YH2, Automatic
Driving Pattern
2008 Honda Element EX, 2.4 YH2, AutomaticSECTION Driving Pattern
Start the engine, shift to P position, and wait for at least 1 second.
- Drive the vehicle in this manner only if the traffic regulations and ambient conditions allow.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.