Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2007RIDGELINE RTSREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALLUBRICATION SYSTEMENGINE LUBRICATION SERVICE SPECIFICATIONSENGINE LUBRICATION
2007 Honda Ridgeline RTS
Engine Lubrication
2007 Honda Ridgeline RTSSECTION Engine Lubrication
ENGINE LUBRICATION STANDARDS AND SERVICE LIMITS
| Item | Measurement | Qualification | Standard or New | Service Limit |
|---|---|---|---|---|
| Engine oil | Capacity | Engine overhaul | 5.0 L (5.3 US qt) | |
| Oil change, including filter | 4.3 L (4.5 US qt) | |||
| Oil change, without filter | 4.0 L (4.2 US qt) | |||
| Oil pump | Inner-to-outer rotor clearance | 0.04-0.16 mm (0.002-0.006 in.) | 0.20 mm (0.008 in.) | |
| Pump housing-to-outer rotor clearance | 0.10-0.19 mm (0.004-0.007 in.) | 0.20 mm (0.008 in.) | ||
| Pump housing-to-outer rotor axial clearance | 0.02-0.07 mm (0.001-0.003 in.) | 0.12 mm (0.005 in.) | ||
| Oil pressure with oil temperature at 176°F (80°C) | At idle | 70 kPa (0.7 kgf/cm2 , 10 psi) | ||
| At 3, 000 RPM | 490 kPa (5.0 kgf/cm2 , 71 psi) | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.