Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Be Sure To Download HDS Software Version 3.012.023 On Or After January 1, 2014 (A13120K)
Reference number: A13120K
BE SURE TO DOWNLOAD HDS SOFTWARE VERSION 3.012.023 ON OR AFTER JANUARY 1, 2014
TECHNICAL SERVICE BULLETIN
| HONDA: | All Models |
| APPLIES TO: | All models with immobilizer and one-push start |
SERVICE INFORMATION
In order to have access to the immobilizer, one-push start, keyless access, or remote engine starter functions on or after January 1, 2014, you must download HDS software version 3.012.023. This new software will be made available on January 1st. This is part of our continuing effort to ensure immobilizer system security.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.