Enable Conditions

2007 Honda Element EX, 2.4 YH1, AutomaticSECTION Enable Conditions
ENABLE CONDITIONS

Condition Minimum Maximum
Elapsed time after starting the engine 10 seconds -
No active DTCs P0101, P0102, P0103, P0107, P0108, P0117, P0118, P0134, P0135, P0300, P0301, P0302, P0303, P0304, P0335, P0339, P0443, P0451, P0452, P0453, P0496, P0497, P0498, P0499, P1128, P1129, P1157, P1172, P145C, P2195, P2227, P2228, P2229, P2238, P2252, P2422
Others The EVAP canister vent shut valve has not been closing
Stopping the purge control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.