SYS.OK|MANUAL.DB● LIVE
2007 Honda Civic LX, 4D Sedan, Automatic

Quick Lookups: Fluids

2007 Honda Civic LX, 4D Sedan, AutomaticSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas 2.70 OZS. 0.07 L PAG 46 Approximate capacity. S
Air Cond Refrigerant Sedan 1.00 LBS. 0.45 KG R-134a S
Automatic Transmission Fluid Sedan Drain and Refill 2.50 QTS. 2.36 L HONDA Automatic Transmission Fluid DW-1 Honda has introduced ATF DW-1, a new synthetic ATF that replaces ATF-Z1. DW-1 has been designed to improve cold transmission performance and fuel economy. ATF DW-1 is factory fill for all 2011 and later Honda vehicles equipped with Automatic Transmissions. ATF DW-1 will replace all earlier ATF Fluids. ATF-Z1 may be used in 2010 and older models while it is available. See TSB No. A10110H. S
Automatic Transmission Fluid Sedan Total Capacity 6.20 QTS. 5.86 L HONDA Automatic Transmission Fluid DW-1 Honda has introduced ATF DW-1, a new synthetic ATF that replaces ATF-Z1. DW-1 has been designed to improve cold transmission performance and fuel economy. ATF DW-1 is factory fill for all 2011 and later Honda vehicles equipped with Automatic Transmissions. ATF DW-1 will replace all earlier ATF Fluids. ATF-Z1 may be used in 2010 and older models while it is available. See TSB No. A10110H. S
Brake Fluid N/A N/A HONDA DOT 3 or DOT 4 Brake Fluid Fill to line on reservoir. S
Engine Coolant DX,EX,GX,LX,Sedan,Automatic Trans Drain and Refill 5.80 QTS. 5.48 L HONDA Long-life Antifreeze/Coolant Type 2 This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water. Includes: the coolant in the reserve tank and that remaining in the engine. S
Engine Coolant DX,EX,GX,LX,Sedan,Automatic Trans Total Capacity 7.50 QTS. 7.09 L HONDA Long-life Antifreeze/Coolant Type 2 This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water. S
Engine Oil DX,EX,GX,LX,Sedan Drain and Refill,w/Filter 3.90 QTS. 3.69 L API - SAE 5W-20 Excluding the oil remaining in the engine. You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. S
Engine Oil DX,EX,GX,LX,Sedan Drain and Refill,w/o Filter 3.70 QTS. 3.5 L API - SAE 5W-20 Excluding the oil remaining in the engine. You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. S
Engine Oil DX,EX,GX,LX,Sedan Total Capacity 4.80 QTS. 4.54 L API - SAE 5W-20 You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. S
Fuel Tank 13.20 GALS. 49.96 L S
Manual Transmission Fluid DX,EX,LX,Sedan Drain and Refill 1.50 QTS. 1.41 L HONDA Manual Transmission Fluid Use SAE 10W-30 or 10W-40 viscosity motor oil as a temporary replacement with API Certification seal that says "FOR GASOLINE ENGINES". Motor oils SAE 10W-30 or 10W-40 do not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient. S
Manual Transmission Fluid DX,EX,LX,Sedan Total Capacity 1.70 QTS. 1.6 L HONDA Manual Transmission Fluid Use SAE 10W-30 or 10W-40 viscosity motor oil as a temporary replacement with API Certification seal that says "FOR GASOLINE ENGINES". Motor oils SAE 10W-30 or 10W-40 do not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient. S
Power Steering Fluid N/A N/A HONDA Power Steering Fluid DO NOT use Automatic Transmission Fluid. S
Windshield Washer Fluid 2.60 QTS. 2.46 L All Weather Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.