Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2007 Honda Accord V6-3.0L Hybrid
Repair and Diagnosis: Service Precautions
2007 Honda Accord V6-3.0L HybridSECTION Service Precautions
Service Precautions
IMA System
The Accord Hybrid has an Auto-Stop system that shuts the engine off under certain conditions to improve fuel economy while the vehicle is at a stop. In Auto-Stop mode, driver input, such as releasing the brake pedal, will cause the engine to restart.
Before servicing the Accord Hybrid, turn the ignition switch OFF and remove the key so the engine cannot be started.
Before performing any service on the Accord Hybrid's IMA system, make sure to turn the battery module switch OFF and wait 5 minutes before working on the vehicle.
IMA System
The Accord Hybrid has an Auto-Stop system that shuts the engine off under certain conditions to improve fuel economy while the vehicle is at a stop. In Auto-Stop mode, driver input, such as releasing the brake pedal, will cause the engine to restart.
Before servicing the Accord Hybrid, turn the ignition switch OFF and remove the key so the engine cannot be started.
Before performing any service on the Accord Hybrid's IMA system, make sure to turn the battery module switch OFF and wait 5 minutes before working on the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.