Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2007ACCORD V6-3.0L HYBRIDREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTNAVIGATION SYSTEMTESTING AND INSPECTIONCOMPONENT TESTS AND GENERAL DIAGNOSTICS
2007 Honda Accord V6-3.0L Hybrid
Component Tests and General Diagnostics
2007 Honda Accord V6-3.0L HybridSECTION Component Tests and General Diagnostics
Forced Starting of Display
Special Tools Required
SCS service connector 07PAZ-0010100
1. Connect the SCS service connector (A) to the navigation service check connector (B) located under the driver's side dash.
2. Turn the ignition switch ON (II).
3. Check that the system starts up, and then changes to the "Navi System Link" screen.
NOTE: If the system fails to display the "Navi System Link" screen, refer to No picture is displayed.
Special Tools Required
SCS service connector 07PAZ-0010100
1. Connect the SCS service connector (A) to the navigation service check connector (B) located under the driver's side dash.
2. Turn the ignition switch ON (II).
3. Check that the system starts up, and then changes to the "Navi System Link" screen.
NOTE: If the system fails to display the "Navi System Link" screen, refer to No picture is displayed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.