Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2006S2000 L4-2.2LREPAIR AND DIAGNOSISSPECIFICATIONSPRESSURE, VACUUM AND TEMPERATURE SPECIFICATIONSENGINE OIL PRESSURE
2006 Honda S2000 L4-2.2L
Engine Oil Pressure
2006 Honda S2000 L4-2.2LSECTION Engine Oil Pressure
Engine Oil Pressure
Engine Oil Temperature 176°F (80°C)
Engine Oil Pressure:
At Idle 250 kPa (2.5 kgf/cm2 36 psi) min.
At 3,000 rpm 590 kPa (6.0 kgf/cm2, 85 psi) min.
Engine Oil Temperature 176°F (80°C)
Engine Oil Pressure:
At Idle 250 kPa (2.5 kgf/cm2 36 psi) min.
At 3,000 rpm 590 kPa (6.0 kgf/cm2, 85 psi) min.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.