Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2006ELEMENT EX, 2.4 YH1, STANDARDREPAIR AND DIAGNOSISBODY & FRAMESEATSREAR SEAT DISASSEMBLY/REASSEMBLYSEAT SUPPORT REMOVAL/INSTALLATION
2006 Honda Element EX, 2.4 YH1, Standard
Seat Support Removal/Installation
2006 Honda Element EX, 2.4 YH1, StandardSECTION Seat Support Removal/Installation
- Remove the seat support (A).
- 1 Release the hooks (B), and detach the clip (C), then remove the inner support cover (D).
- 2 Remove the rear seat belt buckle center anchor bolt (E).
- 3 Remove the support bracket covers (F) from both sides.
- 4 Remove the bolts (G).
- 5 Release the support spring (H).
- Install the seat support in the reverse order of removal, and note these items:
- Apply multipurpose grease to the moving portions of the link (A) as indicated by the arrows.
- Apply liquid thread lock to the center anchor bolt before reinstallation.
- Make sure there are no twists or kinks in the seat belt buckle before reinstallation.
- When installing the inner support cover, slip the strap through the hole in the cover.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.