SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2006ELEMENT EX, 2.4 YH1, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMADVANCED DIAGNOSTICSDTC P0300: RANDOM MISFIRE DETECTEDENABLE CONDITIONS
2006 Honda Element EX, 2.4 YH1, Standard

Enable Conditions

2006 Honda Element EX, 2.4 YH1, StandardSECTION Enable Conditions
ENABLE CONDITIONS

Condition Minimum Maximum
Engine coolant temperature 14°F (-10°C)(1) -
68°F (20°C)(2)
Engine speed 500 rpm 6,500 rpm
MAP value(3) 800 rpm (4) 24 kPa (7.1 in.Hg, 180 mmHg) -
720 rpm(5) 22 kPa (6.5 in.Hg, 163 mmHg)
2,500 rpm 24 kPa (6.9 in.Hg, 175 mmHg)(4)
21 kPa (6.1 in.Hg, 154 mmHg)(5)
Fuel feedback Other than during fuel cut-off operation
No active DTCs P0107, P0108, P0117, P0118, P0122, P0123, P0335, P0339, P1109, P1121, P1122, P1128, P1129, P2227, P2228, P2229
Other Test-drive on a flat road to avoid misdetection
(1) When starting the engine at an engine coolant temperature of 14°F (-10°C) or less.
(2) When starting the engine at an engine coolant temperature of more than 14°F (-10°C).
(3) Varies with driving conditions.
(4) A/T model
(5) M/T model
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.