Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2006ELEMENT EX, 2.4 YH1, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEFUEL DELIVERYENGINE FUEL SYSTEM SERVICE SPECIFICATIONSFUEL AND EMISSIONS
2006 Honda Element EX, 2.4 YH1, Standard
Fuel and Emissions
2006 Honda Element EX, 2.4 YH1, StandardSECTION Fuel and Emissions
FUEL AND EMISSIONS SPECIFICATION
| Item | Measurement | Qualification | Standard or New |
|---|---|---|---|
| Fuel pressure regulator | Pressure with fuel pressure gauge connected | 330-380 kPa (3.4-3.9 kgf/cm2 , 48-55 psi) | |
| Fuel tank | Capacity | 60 L (15.9 US gal) | |
| Engine idle | Idle speed without load | M/T (in neutral) | 700+/-50 RPM |
| A/T (in N or P position) | 700+/-50 RPM | ||
| Idle speed with high electrical load (A/C switch ON, temperature set to Max Cool, blower fan on High, rear window defogger ON, and headlights on high beam) | M/T (in neutral) | 720+/-50 RPM | |
| A/T (in N or P position) | 720+/-50 RPM |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.