Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSHONDA2005CR-V 2WD L4-2.4LREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGSERVICE AND REPAIRA/C REFRIGERANT OIL REPLACEMENT
2005 Honda CR-V 2WD L4-2.4L
A/C Refrigerant Oil Replacement
2005 Honda CR-V 2WD L4-2.4LSECTION A/C Refrigerant Oil Replacement
A/C Refrigerant Oil Replacement
Recommended PAG oil: KEIHIN SP-10:
- P/N 38897-P13-A01AH: 120 mL (4 fl.oz)
- P/N 38899-P13-A01: 40 mL (1 1/3 fl.oz)
Add the recommended refrigerant oil in the amount listed if you replace any of the following parts.
- To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
- Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
- Do not spill the refrigerant oil on the vehicle; it may damage the paint. If it gets on the paint, wash it off immediately.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.