Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2005ACCORD L4-2.4LREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSENGINE, A/T CONTROLS - VEHICLE CREEPS IDLING IN GEAR
2005 Honda Accord L4-2.4L
Engine, A/T Controls - Vehicle Creeps Idling In gear
2005 Honda Accord L4-2.4LSECTION Engine, A/T Controls - Vehicle Creeps Idling In gear
06-041
October 11, 2011
Applies To:
2003-05 Accord L4 - All with A/T
2003-05 Element - All with A/T
Vehicle Moves (Creeps) Faster Than Expected When Idling in Gear
(Supersedes 06-041, dated July 21, 2011, to revise the information marked by the black bars and asterisks)
REVISION SUMMARY
SYMPTOM
The vehicle moves slightly faster than expected with the transmission in gear, foot off the brake, and foot off the throttle.
PROBABLE CAUSE
The PCM PGM-FI software causes extra engine torque after a cold start.
CORRECTIVE ACTION
Update the PCM PGM-FI software.
SOFTWARE INFORMATION
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation Number: 125517
*Flat Rate Time: 0.3 hour*
Failed Part: P/N 37820-RAA-305
Defect Code: 03214
Symptom Code: 09201
Skill Level: Repair Technician
REPAIR PROCEDURE
Update the HDS software (refer to Service Bulletin 01-023, Updating the ECM/PCM).
Disclaimer
October 11, 2011
Applies To:
2003-05 Accord L4 - All with A/T
2003-05 Element - All with A/T
Vehicle Moves (Creeps) Faster Than Expected When Idling in Gear
(Supersedes 06-041, dated July 21, 2011, to revise the information marked by the black bars and asterisks)
REVISION SUMMARY
SYMPTOM
The vehicle moves slightly faster than expected with the transmission in gear, foot off the brake, and foot off the throttle.
PROBABLE CAUSE
The PCM PGM-FI software causes extra engine torque after a cold start.
CORRECTIVE ACTION
Update the PCM PGM-FI software.
SOFTWARE INFORMATION
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation Number: 125517
*Flat Rate Time: 0.3 hour*
Failed Part: P/N 37820-RAA-305
Defect Code: 03214
Symptom Code: 09201
Skill Level: Repair Technician
REPAIR PROCEDURE
Update the HDS software (refer to Service Bulletin 01-023, Updating the ECM/PCM).
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.