Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHONDA2001ODYSSEY LXREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCETUNE-UPIGNITION SYSTEMIGNITION COIL REMOVAL/INSTALLATION

2001 Honda Odyssey LX

Ignition Coil Removal/Installation

2001 Honda Odyssey LXSECTION Ignition Coil Removal/Installation

Remove the intake manifold cover (A) and ignition coil cover(s) (B).

Fig 1: Removing Intake Manifold Cover & Ignition Coil Cover (1999-2001 Models)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the ignition coil connectors, then remove the ignition coils.

Fig 2: Disconnecting Ignition Coil Connectors (1999-2001 Models)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the ignition coil in the reverse order of removal.

Fig 3: Installing Ignition Coil (2002-04 Models)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.