Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2001ODYSSEY LXREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALSTARTERSTARTING SYSTEMSTARTER SPECIFICATIONS
2001 Honda Odyssey LX
Starter Specifications
2001 Honda Odyssey LXSECTION Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Brush Length (Minimum) | ||||
| Accord | ||||
| 2.3L | ||||
| A/T | .43" (11.0 mm) | |||
| M/T | .39" (10.0 mm) | |||
| 3.0L | .43" (11.0 mm) | |||
| Civic, Odyssey, Prelude & S2000 | .43" (11.0 mm) | |||
| CR-V | .35" (9.0 mm) | |||
| Brush Spring Tension | ||||
| Accord | ||||
| 2.3L | ||||
| A/T | 3.5-4.0 Lbs. (1.6-1.8 kg) | |||
| M/T | 3.1-4.4 Lbs. (1.4-2.0 kg) | |||
| 3.0L | 3.5-4.0 Lbs. (1.6-1.8 kg) | |||
| Civic, Odyssey, Prelude & S2000 | 3.5-4.0 Lbs. (1.6-1.8 kg) | |||
| CR-V | 3.1-4.0 Lbs. (1.4-1.8 kg) | |||
| Commutator Diameter (Minimum) | ||||
| Accord | ||||
| 2.3L | ||||
| A/T | 1.08" (27.5 mm) | |||
| M/T | 1.14" (29.0 mm) | |||
| 3.0L | 1.08" (27.5 mm) | |||
| Civic, Odyssey, Prelude & S2000 | 1.08" (27.5 mm) | |||
| CR-V | 1.06" (27.0 mm) | |||
| Commutator Mica Depth (Minimum) | ||||
| Accord | ||||
| 2.3L | ||||
| A/T | .006" (.15 mm) | |||
| M/T | .008" (.20 mm) | |||
| 3.0L | .006" (.15 mm) | |||
| Civic, Odyssey, Prelude & S2000 | .006" (.15 mm) | |||
| CR-V | .008" (.20 mm) | |||
| Commutator Runout (Maximum) | .002" (.05 mm) | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.