Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2001ODYSSEY LXREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEEXTERIOR/INTERIOR TRIMDOORSSLIDING DOOR HOOK PIN AND MALE STOP REPLACEMENT
2001 Honda Odyssey LX
Sliding Door Hook Pin and Male Stop Replacement
2001 Honda Odyssey LXSECTION Sliding Door Hook Pin and Male Stop Replacement
- Remove the hook cover (A), then remove the sliding door hook pin (B) using a Torx T50 bit.
- Remove the male stop cover (C), then remove the sliding door male stop (D).
- Install the hook pin and male stop in the reverse order of removal. Apply thread liquid lock to the sliding door hook pin and male stop before reinstallation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.