Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Thermostat Test: Insight
To test a closed thermostat, suspend thermostat in container of water so that thermostat does not touch bottom of container. Place thermometer in water without it touching the bottom or sides of container, and heat water. Check temperature at which thermostat first opens and then when thermostat is fully open. Measure lift height of thermostat when it fully opens. Lift height should be greater than .31" (8.0 mm) when thermostat is fully open. Thermostat should begin to open when coolant temperature is 187-194°F (86-90°C). Thermostat should be fully open at 212°F (100°C). Replace thermostat if it does not meet specifications.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.