Engine Compression

2001 Honda CR-V LX, 2.0 RD2, MDLASECTION Engine Compression

Check engine compression at specified cranking speed, with engine at normal operating temperature, all spark plugs removed and throttle wide open.

ENGINE COMPRESSION SPECIFICATIONS

Application Specification
Normal Compression Pressure
Accord (1) (2)
Civic (1) (2)
CR-V (3) 178 psi (12.5 kg/cm2 )
Insight (4) (2)
Odyssey (1) (2)
Prelude (3) 185 psi (13.0)
S2000 (3) 228 (16.0)
Minimum Compression Pressure
All Except Insight 135 psi (9.5 kg/cm2 )
Insight 128 psi (9.0 kg/cm2 )
Maximum Variation Between Cylinders 28 psi (2.0 kg/cm2 )
(1) Compression test performed at cranking speed of 200 RPM.
(2) Information unavailable from manufacturer.
(3) Compression test performed at cranking speed of 250 RPM.
(4) Compression test performed at cranking speed of 250 RPM with battery module turned off.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.