Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2000ACCORD EX SEDAN L4-2254CC 2.3L SOHC (VTEC) MFIREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSA/T - VEHICLE SPEED SENSOR INSTALLATION PRECAUTIONS
2000 Honda Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI
A/T - Vehicle Speed Sensor Installation Precautions
2000 Honda Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFISECTION A/T - Vehicle Speed Sensor Installation Precautions
Install VSS Properly to Avoid Reman A/T Damage
We can't emphasize enough how important it is to follow, to the letter, the installation instructions that come with a reman A/T. These instructions help ensure that you avoid damaging the A/T and score a successful repair.
This is particularly true when it comes to installing the vehicle speed sensor (VSS). Step 6 of the instructions tells you to make sure its gear is fully engaged and the VSS is fully seated before you tighten the retaining bolt.
If you don't install the VSS properly, the speed sensor gear will get stripped and the A/T will be seriously damaged. So don't take risks with your customer's vehicle. Always follow these instructions to the letter. You can rest assured you're doing the job right.
We can't emphasize enough how important it is to follow, to the letter, the installation instructions that come with a reman A/T. These instructions help ensure that you avoid damaging the A/T and score a successful repair.
This is particularly true when it comes to installing the vehicle speed sensor (VSS). Step 6 of the instructions tells you to make sure its gear is fully engaged and the VSS is fully seated before you tighten the retaining bolt.
If you don't install the VSS properly, the speed sensor gear will get stripped and the A/T will be seriously damaged. So don't take risks with your customer's vehicle. Always follow these instructions to the letter. You can rest assured you're doing the job right.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.