Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2000ACCORD EX SEDAN L4-2254CC 2.3L SOHC (VTEC) MFIREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON PIN, ENGINESERVICE SPECIFICATIONS
2000 Honda Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI
Service Specifications
2000 Honda Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFISECTION Service Specifications
Piston pin
O.D.
Standard or New 21.962 - 21.965 mm (0.8646 - 0.8648 inch)
Limit 21.954 mm (0.8643 inch)
Pin-to-piston clearance
Standard or New -0.0050 - +0.0010 mm (-0.00020 - +0.00004 inch)
Limit 0.004 mm (0.0002 inch)
O.D.
Standard or New 21.962 - 21.965 mm (0.8646 - 0.8648 inch)
Limit 21.954 mm (0.8643 inch)
Pin-to-piston clearance
Standard or New -0.0050 - +0.0010 mm (-0.00020 - +0.00004 inch)
Limit 0.004 mm (0.0002 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.