Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1994DEL SOL L4-1.5L SOHCREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINESPECIFICATIONSENGINE REBUILDING SPECIFICATIONSPISTONS, PINS AND RINGS
1994 Honda Del Sol L4-1.5L SOHC
Pistons, Pins and Rings
1994 Honda Del Sol L4-1.5L SOHCSECTION Pistons, Pins and Rings
Piston Diameter (Std.) 2.9520-2.9524 inches
Piston Clearance 0.0004-0.0016 inches
Piston Pin Diameter 0.7478-0.7480 inches
Piston Pin To Piston Clearance 0.0004-0.0009 inches
Piston Ring End Gap:
Top 0.006-0.012 inches
Second 0.012-0.018 inches
Oil 0.008-0.031 inches
Piston Ring To Groove Clearance
Top Ring 0.0012-0.0024 inches
Second Ring 0.0012-0.0022 inches
Piston Clearance 0.0004-0.0016 inches
Piston Pin Diameter 0.7478-0.7480 inches
Piston Pin To Piston Clearance 0.0004-0.0009 inches
Piston Ring End Gap:
Top 0.006-0.012 inches
Second 0.012-0.018 inches
Oil 0.008-0.031 inches
Piston Ring To Groove Clearance
Top Ring 0.0012-0.0024 inches
Second Ring 0.0012-0.0022 inches
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.