Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1993ACCORD L4-2156CC 2.2L SOHCREPAIR AND DIAGNOSISSTARTING AND CHARGINGCHARGING SYSTEMALTERNATORSERVICE AND REPAIRDISASSEMBLY AND REASSEMBLY/OVERHAUL
1993 Honda Accord L4-2156cc 2.2L SOHC
Disassembly and Reassembly/Overhaul
1993 Honda Accord L4-2156cc 2.2L SOHCSECTION Disassembly and Reassembly/Overhaul
Removing Pulley:
Alternator Exploded View:
NOTE: It is only necessary to separate the pulley, drive end housing, and rotor when the front bearing needs replacement.
To remove the pulley, loosen the locknut with 10 mm and 22 mm wrenches. If necessary, use an impact wrench
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.