Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1993ACCORD L4-2156CC 2.2L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
1993 Honda Accord L4-2156cc 2.2L SOHC
Engine Mount
1993 Honda Accord L4-2156cc 2.2L SOHCSECTION Engine Mount
COMPONENT TORQUE
TORQUE ROD TO FRONT MOUNT
12 X 1.25 mm SPECIAL BOLT [2] 65 Nm (47 lb ft)
FRONT MOUNT TO BLOCK
10 X 1.25 mm bolts 39 Nm (28 lb ft)
REAR MOUNT BRACKET TO ENGINE
12 X 1.25 mm 55 Nm (40 lb ft)
REAR MOUNT BRACKET TO REAR MOUNT
12 X 1.25 mm SPECIAL BOLT [2] 65 Nm (47 lb ft)
REAR MOUNT TO REAR BEAM
10 X 1.25 mm 60 Nm (43 lb ft)
LEFT SIDE MOUNT BRACKET TO BLOCK
10 X 1.25 mm bolts 48 Nm (35 lb ft)
LEFT SIDE MOUNT TO MOUNT BRACKET
12 X 1.25 mm 55 Nm (40 lb ft)
LEFT SIDE MOUNT TO BODY BRACKET
12 X 1.25 mm 65 Nm (47 lb ft)
BRACKET "A" TO SIDE MOUNT BRACKET
8 X 1.25 mm bolt 22 Nm (16 lb ft)
BRACKET "A" TO BLOCK
10 X 1.25 mm bolt 48 Nm (35 lb ft)
BRACKET "B" TO SIDE MOUNT BRACKET [1]
8 X 1.25 mm bolt 22 Nm (16 lb ft)
BRACKET "B" TO BLOCK [1]
10 X 1.25 mm bolt 48 Nm (35 lb ft)
[1] Standard for some types.
[2] CAUTION: Once loosened, these SPECIAL BOLTS must be replaced with new ones.
TORQUE ROD TO FRONT MOUNT
12 X 1.25 mm SPECIAL BOLT [2] 65 Nm (47 lb ft)
FRONT MOUNT TO BLOCK
10 X 1.25 mm bolts 39 Nm (28 lb ft)
REAR MOUNT BRACKET TO ENGINE
12 X 1.25 mm 55 Nm (40 lb ft)
REAR MOUNT BRACKET TO REAR MOUNT
12 X 1.25 mm SPECIAL BOLT [2] 65 Nm (47 lb ft)
REAR MOUNT TO REAR BEAM
10 X 1.25 mm 60 Nm (43 lb ft)
LEFT SIDE MOUNT BRACKET TO BLOCK
10 X 1.25 mm bolts 48 Nm (35 lb ft)
LEFT SIDE MOUNT TO MOUNT BRACKET
12 X 1.25 mm 55 Nm (40 lb ft)
LEFT SIDE MOUNT TO BODY BRACKET
12 X 1.25 mm 65 Nm (47 lb ft)
BRACKET "A" TO SIDE MOUNT BRACKET
8 X 1.25 mm bolt 22 Nm (16 lb ft)
BRACKET "A" TO BLOCK
10 X 1.25 mm bolt 48 Nm (35 lb ft)
BRACKET "B" TO SIDE MOUNT BRACKET [1]
8 X 1.25 mm bolt 22 Nm (16 lb ft)
BRACKET "B" TO BLOCK [1]
10 X 1.25 mm bolt 48 Nm (35 lb ft)
[1] Standard for some types.
[2] CAUTION: Once loosened, these SPECIAL BOLTS must be replaced with new ones.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.