Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1993ACCORD L4-2156CC 2.2L SOHCREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGSPECIFICATIONS
1993 Honda Accord L4-2156cc 2.2L SOHC
Heating and Air Conditioning: Specifications
1993 Honda Accord L4-2156cc 2.2L SOHCSECTION Specifications
Location Of Fasteners:
COMPONENT TORQUE VALUES
(1) Suction line (evaporator side): 33 Nm (24 lb-ft)
(A) With Anti-lock brake System: 16 Nm (12 lb-ft)
(2) Discharge hose to condenser: 19 Nm (14 lb-ft)
(3) Condenser line to condenser: 10 Nm (7 lb-ft)
(4) Receiver/Dryer: 14 Nm (10 lb.-ft)
(5) Receiver line A, B, C (both side): 14 Nm (10 lb-ft)
(6) Compressor hose mounting bolts: 22 Nm (16 lb-ft)
(7) Compressor mounting bolts: 22 Nm (16 lb-ft)
(8) Compressor bracket mounting bolts: 50 Nm (36 lb-ft)
(9) Compressor bracket mounting nuts: 50 Nm (36 lb-ft)
Refer to item number in illustration.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.