Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1993ACCORD L4-2156CC 2.2L SOHCREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINECYLINDER HEAD ASSEMBLYSPECIFICATIONSTORQUE SPECIFICATIONS
1993 Honda Accord L4-2156cc 2.2L SOHC
Torque Specifications
1993 Honda Accord L4-2156cc 2.2L SOHCSECTION Torque Specifications
Torque Sequence:
HEAD BOLT TORQUE
1st Step Torque: 40 Nm (29 lb ft)
2nd Step Torque: 70 Nm (51 lb ft)
3rd Step Torque: 108 Nm (78 lb ft)
Cam Holder Torque Sequence:
CAMSHAFT HOLDER TORQUE [1]:
8 mm bolts: 22 Nm (16 lb.ft.)
6 mm bolts: 12 Nm (9 lb.ft.)
VALVE LOCKNUT TORQUE
7 X 0.75 mm: 20 Nm (14 lb ft)
[1] Tighten two turns at a time, in sequence.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.