Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGEO1993PRIZM L4-1600CC 1.6L DOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSAIR BAG SYSTEMS
1993 Geo Prizm L4-1600cc 1.6L DOHC
Air Bag Systems
1993 Geo Prizm L4-1600cc 1.6L DOHCSECTION Air Bag Systems
Center Sensor Assembly 115 in-lbs
Console Mounting Bracket Bolts 89 in-lbs
Forward Sensor Bolts 18 ft-lbs
Inflator Module 78 in-lbs
Knee Bolster Bolts 89 in-lbs
Console Mounting Bracket Bolts 89 in-lbs
Forward Sensor Bolts 18 ft-lbs
Inflator Module 78 in-lbs
Knee Bolster Bolts 89 in-lbs
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.