Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGENESIS2021GV80 2.5T ADVANCED, AWDREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSAIRBAG MODULES AND CLOCK SPRINGPASSENGER AIRBAG (PAB) MODULEREPAIR PROCEDURESREMOVAL
2021 Genesis GV80 2.5T Advanced, AWD
Repair Procedures: Removal
2021 Genesis GV80 2.5T Advanced, AWDSECTION Removal
- Disconnect the negative (-) battery terminal.WARNING:
- Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
- Remove the main crash pad assembly.
(Refer to Body (Interior and Exterior) - "MAIN CRASH PAD ASSEMBLY ")
- Disconnect the passenger airbag connector.
- Loosen the mounting bolt and then remove the PAB module.CAUTION:
- The removed airbag module should be stored in a clean, dry place with the airbag cushion up.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.